General Information
Two things that count for processing stainless steel surfaces are performance and speed. The FEIN HIGH-POWER MOTOR provides the pipe sander RS 12-70 E with a working speed of up to 72 ft/s. The abrasive performance is extremely high with top results - from rough sanding to mirror polishing. Stainless steel pipes with diameters from about 5/16" to 3-1/8" can be finished; especially hand rails and rods. Only two sanding passes are necessary for sanding or polishing pipes because the belt envelops 180° of the pipe. Even hand rails that are already mounted can be finished if they are at least 2" away from the wall. And ''opening'' of the belt is not necessary for closed pipe systems. All these benefits can be quickly reaped during routine labor.
Features:
Pipe polisher with accessory selection covering coarse grinding to mirror finish
Efficient grinding of weld seams due to ideal cutting speed of the grinding belts
Variable speed for grinding, satin finishing and mirror-finish polishing of previously-installed hand rails
Flexible grinding belts conform themselves perfectly, even on sharp pipe curves, and consequently produce seamless surfaces
360 degrees circumferential grinding in only two steps
Optional guide roller for limited wall clearance
Self-start lock
Dustproof ball bearing
Automatic switch-off carbon brushes
Wide range of accessories
