Model TEC-150 MPT

General Information

The manual measuring table is used for controlled, accurate movements of the tube in both angle and axial directions. With the measuring table it is possible to specify accurately both the distance and the angle position between two collars or between the starting point and a collar.

There are two standard lengths available: 95'' and 118''.

Tube Positioning Table 3000

  • Manual positioning system for run-tube
  • For diameters 1⅛ – 12'' and lengths min. 3 x O.D. and max 95''
  • Positioning tolerances:
    • length +/- 0.02'' (machine); +/- 0.04'' (tube)
    • angle +/- 0.5º (machine); +/- 1.0º (tube)
  • Longitudinal and angle position can be seen from digital
    read-out

Tube Positioning Table 6000

  • Manual positioning system for run-tube
  • For diam. 1⅛ – 12'' and lengths min. 3 x O.D. and max 118''
  • Positioning tolerances:
    • length +/- 0.02'' (machine); +/- 0.04'' (tube)
    • angle +/- 0.5º (machine); +/- 1.0º (tube)
  • Longitudinal and angle position can be seen from digital
    read-out