Model 600SA

600SA.jpg

Standard Features

  • Double column machine provides maximum capacity and rigidity.
  • Blade canted at 4 degrees to aid in cutting structural steel and flats.
  • Design utilizes linear bearings for high stiffness and smooth motion.
  • Electronic variable speed drive.
  • Blade breakage and open door shut off with warning indicator.
  • Hydraulic lift of the saw head.
  • Saw up travel can be set to minimize distance between the blade and the top of the material.
  • Saw down travel limit can be set.
  • Semi-automatic cut cycle.
  • Manual saw control, saw up, rapid saw down, saw cut
  • Cutting feed rate hydraulically adjusted.
  • Load sensing valve stops the feed if the blade starts to overload, typical when cutting the web of structural shapes.
  • Magnetic motor starter with shut off at the end of cut, motors thermal overload protection.
  • Power disconnect on machine.
  • Blade guard. Powered blade brush.
  • Manually adjusted vise.
  • Adjustable material length stop for repetitive cutting.
  • Steel wheels with ductile iron hubs.
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration.
  • Flood coolant system to both saw guides with adjustable flow rates.
  • Direct blade drive using a planetary gearbox for a high efficiency drive.
  • Electric system uses only C.S.A./UL approved components and is electrically approved.
  • Premium quality bimetal band saw blade
  • Instructions and parts manual.