Model 600M2

Standard Features

  • Double column machine provides maximum capacity and rigidity.
  • Miter cutting to the front 45° and rear 60°.
  • Hydraulic tilt of saw head with digital display with preset pause.
  • Tilt has variable speed to aid in accurate positioning.
  • Blade canted at 4 degrees to aid in cutting structural steel and flats.
  • Design utilizes linear bearings for high stiffness and smooth motion.
  • Stationary front and rear horizontal vises.
  • Full stroke hydraulic vises on both sides of the blade with variable vise pressure.
  • Hydraulic lift of the saw head.
  • Saw up travel can be set to minimize distance between the blade and the top of the material.
  • Saw down travel limit can be set.
  • Cutting feed rate hydraulically adjusted.
  • Rapid down to prevent unnecessary adjustment of the feed rate.
  • Load sensing valve stops the feed if the blade starts to overload, typical when cutting the web of structural shapes.
  • Steel wheels with ductile iron hubs.
  • Blade guides are carbide faced with rollers to remove blade twist and dampen vibration.
  • Flood coolant system to both saw guides with adjustable flow rates.
  • Gearbox designed for heavy-duty band saw machines, high efficiency planetary drive, oil bath lubrication.
  • Control panel mounted on pivot to aid operator positioning.
  • Electric system uses only C.S.A./UL approved components and is electrically approved.
  • Premium quality bimetal band saw blade
  • Instruction and parts manual