These famous SHUSTERS
come equipped with all-electric controls with reversing starters.
Each has an AC Inverter Drive controlling feed speeds allowing for
optimum production on any length. Other features include pendant control,
positive release electric target, sliding bolt type clutch, with solenoid
control.
• Shuster - the first name in wire straightening and cutting,
presents a full range of infinite variable speed machines - first
in the field.
• Infinite Variable Speed Drive! Infinite feed changes and control.
The speed you want when you want it. Constant speed maintained when
set regardless of load variations.
• Electrically Controlled Clutch And Target! Fewer wearable
parts. Sliding bolt type mechanism. Solenoid actuated, feather touch
control!
• Minimum Maintenance! Frees operator from worry! Speeds Production!
1AVS
.062" to .250" or .062" to .187" - Basic Wire
- 20 to 265 FPM
Micro-switch target and clutch. Lightning cut-off. Hardened steel
cut-off knife delivers square, true, undistorted ends. Direct-drive
five-die straightening flier. Ball and roller bearings throughout.
1V18
.035" to .125" - Basic Wire -20 to 150 FPM Electrically
controlled tripping mechanism. Variable feeding speed to obtain optimum
production over range of the machine. Direct drive from one motor
mounted in welded steel frame.
1V16 is similar to 1V18. Capacity .020" to .080" - Basic
Wire -20 to 150 FPM
2A4V
.062" to .250" or .125" to .312" -Basic Wire -20
to 300 FPM. New 4-roll Totally Enclosed Feed Housing equipped with
two hand wheel type feed pressure controls, distributes the pull required,
especially on flat or shaped stock. An optional 12-roll type straightener
is available to interchange with Rotary Arbor.
2ABV
.157" to .375" - Basic Wire - 20 to 300 FPM Electronic cut-off
produces accurate, square, clean-cut lengths of wire! Operator simply
locks the stop rod gauge for desired length of cut. Target operated
by sensitive micro-switch. Simple, economical operation. Trouble-free
maintenance.
2A4V