2" through 8" Pipe; 900 lbs. max.

The base of this stand is the same as used in Model 4031, aboveA saddle with four roller bearings provides greater side support for the pipe and increased dampening of vibration without impairing the unit's free-rolling characteristics. Saddle height is adjustable over a 10" (254mm) range. The four-roller-bearing saddle may be ordered alone as No. 4001. Replacement roller bearing is No. 4025.

1" through 4" Pipe; 600 lbs. max.

A 22" diameter base and 2" column give this stand plenty of strength for supporting any pipe in its size range. The saddle has two roller bearings for free rotation of the pipe, and absorbs vibration to ensure a smooth, uniform groove. Saddle height is adjustable over a 10" (254mm) range. The two-roller-bearing saddle may be ordered alone as No.4032. Replacement roller bearing is No. 4025.

2" through 14" Pipe; 1200 lbs. max.
This extra-heavy-duty pipe support stand uses two 2" columns on a 22" diameter base to give it exceptional stability and resistance to vibration and pendulum effect. Each column incorporates a sturdy, threaded post infinitely adjustable over a 10" (254 mm) range. The saddle utilizes six roller bearings in an array that provides excellent support for all pipes in its size range.

Fit Models 1000, 1010, 1020, 1021, 1023 and 1040 Portable Groovers. There are many situations where a portable groover will be employed in a single location long enough to make a semi-permanent installation desirable. By simply adding a set of these mounting feet and bolting the machine to the floor, the user gains some of the increased stability and rigidity typical of a stationary groover. When the work is completed, the unit can quickly and easily be disassembled and trucked to a new location.

12"-24" Pipe; 4000 lbs. max.

This is our SuperStand! Fabricated of 6" diameter steel pipe welded to a 36" diameter base, this massive stand can support up to two tons of pipe during grooving operations. Pipe saddle height is adjustable over a 5" (127 mm) range.