MAG Tool Inc. - Orbital Pipe Cutters

CC80

MACHINE CAPACITY
This machine offers you a large diameter cutting range thanks to its system made up of 3 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC80 cuts up to 7 mm in thickness (mild steel) and up to 5 mm thickness on stainless steel.

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor : 13 Kg
• with motor : 15 Kg

SPECIAL CHARACTERISTICS
• Clamping system with wheel
• Machine is delivered in a protective plastic case for easy transportation

MOTORISED SAW BLADE
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 705 W : 130 to 320 rpm.
• Slow electric 1000 W : 10 to 250 rpm. (for thick and tough tubes)
• Pneumatic 1200 W : 0 to 130 rpm.

SPECIFIC ACCESSORIES
The accessories available for this model are:
• Clamp for installation on work table.
• For all other accessories, please refer to the accessories section

CUTTING TIME
The cut is rapidly done with the AXXAIR machines:
• 1" with 2 mm thickness : 15 sec
• 2" with 2 mm thickness : 25 sec

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC120

MACHINE CAPACITY
This machine offers you a large diameter cutting range thanks to its system made up of 4 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC120 cuts up to 15 mm in thickness (mild steel) and up to 10 mm thickness on stainless steel.

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor : 53 Kg
• with motor : 56 Kg

MOTORISED SAW BLADE
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1000 W : 10 to 250 rpm.
• Flex electric 1200 W : 90 to 270 rpm.(for thick and tough tubes)
• Pneumatic 1200 W : 0 to 130 rpm.

ACCESSORIES
The accessories available for this model are:
• Penetration lever
• Automatic rotation and/or clamping
• For all other accessories, please refer to the accessories section

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CUTTING TIME
The cut is rapidly done with the AXXAIR machines:
• 4" with 5 mm thickness : 50 sec
• 2" with 3 mm thickness : 8 sec

CC170

CC220

MACHINE CAPACITY
This machine offers you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC220 cuts up to 15 mm in thickness (mild steel) and up to 10 mm thickness on stainless steel.

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor : 83 Kg
• with motor : 86 Kg

MOTORISED SAW BLADE
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1000 W : 10 to 250 rpm.
• Flex electric 1200 W : 90 to 270 rpm.(for thick and tough tubes)
• Pneumatic 1200 W : 0 to 130 rpm.

SPECIAL ACCESSORIES
The accessories available for this model are :
• Automatic rotation and/or clamping
• Penetration lever which facilitates the cutting of thick tubes
• Wheel for easier rotation of the motorised saw blade

CUTTING TIME
The cut is rapidly done with the AXXAIR machines:
• 8" with 5 mm thickness : 1 min 15 sec
• 2" with 3 mm thickness (SS) : 20 sec

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC320

MACHINE CAPACITY
This machine offers you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Clamping jaws Capacity
Basic SS clamping jaws - 215 to 330 mm
Extra clamping jaws - 140 to 250 mm

The CC320 cuts up to 15 mm in thickness (mild steel) and up to 10 mm thickness on stainless steel.

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor : 93 Kg
• with motor : 96 Kg

MOTORISED SAW BLADE
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1200 W : 90 to 270 rpm.
• Slow electric 1200 W : 30 to 90 rpm. (for thick and tough tubes)
• Pneumatic 1200 W : 0 to 130 rpm.

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

SPECIAL ACCESSORIES
• Penetration lever which facilitates the cutting of thick tubes
• Wheel for easier rotation of the motorised saw blade

SPECIAL ACCESSORIES
The accessories available for this model are :
• Automatic rotation and/or clamping
• For all other accessories, please refer to the accessories section

CC420

MACHINE CAPACITY
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Machine Capacity: Ø215 to 420 mm

These machines cut up to 15 mm in thickness (mild steel) and up to 10 mm thickness on stainless steel.

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
Machine Weight: 158 kg

MOTORISED SAW BLADE
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1200 W : 90 to 270 rpm.
• Slow electric 1200 W : 30 to 90 rpm. (for thick and tough tubes)
• Pneumatic 1200 W : 0 to 130 rpm.

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC520 & CC620

CC520

MACHINE CAPACITY
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Diameter : Ø 315 to 520 mm
Thickness : 1.5 to 15 mm

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
Weight : 250 kg

Reference
• 520F29
• 520F25
• 520P

Motor
• Quick Flex motor 1200 W
• Slow Flex motor 1200 W
• pneumatic AXXAIR motor 1200 W

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC620

MACHINE CAPACITY
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Diameter : Ø 400 to 620 mm
Thickness : 1.5 to 15 mm

MACHINE’S WEIGHT
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
Weight : 280 kg kg

Reference
• 620F29
• 620F25
• 620P

Motor
• Quick Flex motor 1200 W
• Slow Flex motor 1200 W
• pneumatic AXXAIR motor 1200 W

ADVANTAGES
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps