T-D60 Basic Tube Branching System for Copper, ( supercedes T-D35 )
• Branch sizes from 0.500 to 1.000 inch nominal, ( 0.375 inch available as an option )
• Run sizes from 0.500 to 2.000 inch nominal
• M, L or K type Copper
• TEE Forming time 3 to 30 seconds depending on TEE size

Kit includes:
- T-60 Drive Unit
- Small and Large Support Feet, ( allows conversion to 2.500, 3.00 and 4.00 inch nominal run pipe )
- 0.500, 0.750 and 1.000 inch Nominal Collaring Heads
- ND-54 Double Dimpler Notcher
- T-Drill Lubricant
- Training Video
- Gauge Block
- Assorted Hex Keys
- Steel Carrying Case

T-60 Complete Tube Branching System for Copper
• Branch sizes from 0.500 to 2.000 inch nominal, ( 0.375 inch available as an option )
• Run sizes from 0.500 to 4.000 inch nominal
• M, L or K type Copper
• TEE Forming time 3 to 30 seconds depending on TEE size
Kit includes:
- T-60 Drive Unit
- 0.500, 0.750, 1.000, 1.250, 1.500 and 2.000 inch Nominal Collaring Heads
- ND-54 Double Dimpler Notcher
- T-Drill Lubricant
- Training Video
- Gauge Block and Rings
- Assorted Hex Keys
- Steel Carrying Case

•  One brazed joint in lieu of 3 soft soldered joints as with conventional tee systems, ( less chance of leaks )
•  Your tee inventory in one simple kit
•  Invented in 1969
•  All lap joints comply with AWS Standards
•  Complies with B31 and ANSI A40
•  UL and CSA
•  Canadian Plumbing Code: Sec 3.3.2(1)
•  International Plumbing Code: Sec 605.6.1
•  Uniform Plumbing Code 1977 Edition: Sec 606.1.3
•  Uniform Mechanical Code 1977 Edition: Sec 1201.2.1.4.2.1
•  BOCA: Report #77-89
•  I.A.P.M.O.: File #1935
•  National Standard Plumbing Code: Sec 4.2.8.2
•  Standard Plumbing Code: Sec 309.7
•  U.S. Department of Housing and Urban Development
•  U.S. Army Corps of Engineers: Sec 15P1
•  Naval Facilities Engineering Command: Guide Specification Sec NFGS15400,
•  Veterans Administration: Sec 15400 Plumbing, Sec 15501 Sprinkler, Sec 15651 Refrigeration, Sec 15705 HVAC Piping Systems