MAG Tool Inc.

SURPLUS CLEARANCE SPECIALS!

- Prices are in CANADIAN Dollars.

- FOB MAG Tool Inc.

- Subject to prior Sale.

- VISA and Master Card are accepted.

Centrator Purge - Line Up Tool

- Splits any high-low evenly

- Purge at the root only

- Save in gas and fit up time

- Sized for 4"

$ 3,000.00 each

( 1 in stock )

Flange Level

- Speeds set up time prior to tack

- For use with bolt holes from 5/8" to 1-1/4"
- No additional tools required, self contained

$ 95.00 each

( 2 in stock )

MBE 100 Magtron

- 1800 watts, 120 VAC

- Variable speed: 50 to 130 and 160 to 450 RPM

- Capacity 7/16" to 4" annular

- safety Guard is included

- Weight @ 26 kg

$ 3,436.00 each

( 1 in stock )

MDG 3000 is ideal for small to medium size venues. It has an adjustable output between 5 and 3,000 cubic foot per minute of pure white smoke that disperses into a fine haze ideal for laser beam shows.

Includes booster for use on Plumbing System Testing!

$ 2,495.00 each

SOLD

MDG 5000 is ideal for medium to large venues where larger volumes of smoke and haze are required. It has an adjustable output between 5 and 10,000 cubic foot per minute of pure white smoke that disperses into a fine haze ideal for laser beam shows.

Includes booster for use on Plumbing System Testing!

$ 2,995.00 each

( 1 in stock )

Trumpf N500 Nibbler
- Capacity .197" on 57,000 tensile, .105 on 114,000 tensile
- Working speed 4 fpm
- Starting hole required 1-1/4"
- Smallest radius 3-1/8"
- Strokes per minute @ nominal load 600
- Weight without cable 8-1/2 LBS
- Motor 1100 watts, 120 VAC

$ 2,500.00 each

SOLD

POWER POINT PORTABLE TUNGSTEN GRINDER
- 120 VAC, variable Speed Motor.
- Capacity .040", .060", .090" and .125".
- Hand Held and lightweight @ 1 LB.
- Sharpens, Cuts and Flattens.
- Comes standard with 2 Sided Diamond Wheel, collets for .093" and .125".
- Additional spare parts included: 1 x PPE-002, 2 sided diamond wheel, 1 x PPE-003, wheel mandrel, 1 x PPE-009, .093" collet.

Ideal for on site use: in a welding tent, on a scaffold or wherever a stationary unit is not available.

$ 195.00 Canadian Dollars

SOLD

Project Tool Model 1015

- 1-1/2" tube

- Series round notch punch and die equal sizes

- Requires 8 Tons of force to effect closure

$ 627.00 each

( 1 in stock )

Root Ease Purge - Line Up Tool

- Splits any high -low evenly

- Purge at the root only, ( saves gas )

- Sets of copper backing shoes for 6" S/10 and 6" S/40

- 4-way Hydraulic Pump included

$ 3,500.00 each

( 1 in stock )

SR-80 Lenan Solvent Still
- 8 gallon stainless steel tub capacity
- Boiling range to 450 degrees F
- 240 VAC, 10 amp, single phase
- 2250 watt oil bath immersion heater
- Air cooled condenser
- Full batch recycling time, 2 to5 hours
- Meets requirements for all Class 1, Div 1, Group D locations
- Weight, 350 LBS
- Dimensions, 31" W x 46" H x 30" D

$ 2,000.00 each

( 1 in stock )

SOLD

Axxair CC320

The CC320 Orbital Pipe Cutter offers you a large diameter cutting range thanks to its system made up of 6 concentric stainless steel clamping jaws.
This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Capacity:

- Basic clamping jaws, 8" to 12", ( 215 to 330 mm )

- Extra clamping jaws, 6" to 12", ( 140 to 250 mm )

- Maximum wall thickness, .625", ( 15 mm )

$ 15,000.00 each

SOLD