Programming
State-of-the-art programming via cursor and L.E.D. display to adapt easily and quickly to welding conditions. Programs can be stored in the memory of the power source (see technical specifications for details). Operating programs can be loaded from the remote control pendant.

Control of the weld cycle
Due to the remote control, the main welding parameters can be immediately modified to adapt to new conditions.

Storage - Documentation
It is possible to print the programs and store them on a memo card. At the end of every weld, the real parameters can be printed.

Computerized TIG Orbital Welding Power Supplies available for RENT.
Call us or email for more details.

CHARACTERISTICS
• 16 program "user" memory directly accessible by remote control.
• Library with 60 pre-defined programs for rapid fine-tuning of parameters.
• Saving of programs by internal memory and/or memory card.
• Practical display screen with 4 lines of 20 characters.
• Data acquisition of actual parameters, with control ticket printout via integrated printer.

USE
• Easy to use due to high performance, intuitive programming.

TECHNICAL DATA
• Current ranges:
- 2 to 160 A + extra low range from 2 to 50 A. (at 230 V)
- 2 to 100 A (at 100/115 V)
• Duty cycle: 160 A / 40% 110 A / 100% (230 / 200 V)
• Screen display during welding:
- of welding current
- of voltage
- of torch position in degrees
• Remote control pendant with:
- selection of program used
- cycle start and cycle stop
- emergency stop
- manual movement control
- real time modification of parameters
- gas and water circulation control
- manual slope down  

APPLICATION SECTORS
• Food industry
• Aeronautics / Aerospace
• Microelectronics
• Pharmaceuticals / Biochemistry
• Heat exchangers
• Heating and ventilation

PROCESS
• Continuous current TIG welding

ACCESSORIES
• PC programming kit
• 16 program memory card - gas tube
• pressure regulator and flowmeter Argon
• pressure regulator and flowmeter Argon / Hydrogen

ADVANTAGES
• Integrated torch cooling system by water circulation in closed circuit
• compact and easy to transport.
• Possibility to connect heads with tachometer, as option. - Possibility of connection to manual TIG torch.

CHARACTERISTICS
• Inverter based power source technology
• 16 program "user" memory directly accessible by operator pendant
• Integrated library with 60 pre-defined programs covering various common material types, tube diameters and wall thickness
• Data acquisition of actual parameters, printout via integrated printer
• Storage of programs by internal memory and/or by memory card
• Integral closed circuit water recirculation system for torch cooling
• Ideal for shop, site and sub-assembly work

USE
• User friendly due to high performance, intuitive programming

TECHNICAL DATA
• Current ranges: 4 - 250 A
• Duty cycle: 250 A / 60 % - 190 A / 100
• Screen display during welding:
-of welding current
-of arc voltage
-of torch position in degrees (impulses of movements)
• Remote control pendant with:
-program selection
-control of cycle start and cycle stop
-emergency stop
-manual movement control: torch and wire feeder
-real time modification of parameters with cursors Delta +_
-gas and water flow control / security
-manual slope down

APPLICATION SECTORS
• Chemical, food & beverage industries
• Heating and ventilation: production of heat exchangers
• Mechanised welding (with PO motor)

ACCESSORIES
• Memory card (16 programs)
• Gas hose
• Pressure regulator and flow meter Argon and Argon/Hydrogen
• Manual torch 8 m with quick connectors and accessories

CHARACTERISTICS
• Inverter based power source technology
• Integrated arc voltage height control and weaving motions
• Large capacity memory, over 150 programs (by integrated PC)
• Data acquisition of actual parameters, printout via integrated printer
• Possibility of connecting a separate printer
• Storage of programs by internal non volatile memory and/or by 3.5" disk
• Programmable gas (mass flowmeter) with flow safety valve
• Integrated closed water cooling system
• Standard with AVC and oscillation

USE
• User friendly due to high performance, intuitive programming

TECHNICAL DATA
• Current ranges: 4 - 250 A
• Duty cycle: 250 A / 60 % - 190 A / 100
• Welding parameters displayed via built in (5.7") LCD screen and remote control operator pendant:
-welding current
-arc voltage
-modified parameters
-torch position in degrees (impulses of movements)
-the welding cycle time remaining
• Remote control pendant with:
-liquid crystal display screen
-program selection
-control of cycle start and cycle stop
-emergency stop
-manual movement control: torch, wire feeder, oscillation and arc voltage
-real time modification of parameters with cursors Delta +_
-gas and water flow control / security
-manual slope down

APPLICATION SECTORS
• Chemical industry, pipelines
• Aeronautics / Aerospace
• Heating and ventilation: production of heat exchangers
• Mechanised welding (with PO motor)

ACCESSORIES
• External printer kit
• Gas hose
• Pressure regulator and flowmeter Argon and Argon/Hydrogen
• Materials handling car
• Manual torch 8 m with quick connectors and accessories

CHARACTERISTICS
• Inverter based power source technology
• Integrated arc voltage height control and weaving motions
• Large capacity memory, over 150 programs (by integrated PC)
• Data acquisition of actual parameters, printout via integrated printer
• Possibility of connecting a separate printer
• Storage of programs by internal non volatile memory and/or by 3.5" disk
• Programmable gas (mass flowmeter) with flow safety valve
• Integrated closed water cooling system
• Universility for all welding needs

USE
• User friendly due to high performance, intuitive programming

TECHNICAL DATA
• Current ranges: 5 - 350 A
• Duty cycle: 350 A / 45 % - 250 A / 100
• Welding parameters displayed via built in (5.7") LCD screen and remote control operator pendant:
-welding current
-arc voltage
-modified parameters
-torch position in degrees (impulses of movements)
-the welding cycle time remaining
• Remote control pendant with:
-liquid crystal display screen
-program selection
-control of cycle start and cycle stop
-emergency stop
-manual movement control: torch and wire feeder
-real time modification of parameters with cursors Delta +_
-gas and water flow control / security
-manual slope down

APPLICATION SECTORS
• Chemical industry, pipeline
• Heating and ventilation: production of heat exchangers
• Mechanised welding (with PO motor)
• Aeronautics / Aerospace

ACCESSORIES
• External printer kit
• Gas hose
• Pressure regulator and flowmeter Argon and Argon/Hydrogen
• Manual torch 8 m with quick connectors and accessories