POSITIONERS and ROLLS
Model WPS-1000-D Welding Positioner

• Heavy duty construction
• Variable DC speed controller
• Forward – Stop – Reverse Switch
• Foot pedal switch
• Direct mounted drive shaft
• Remote control pedestal with rubber insulted base plate
• 12 foot extension cords for input and remote pedestal
• Tilt 120 degrees left and right in 15 degree increments
• Manual tilt mechanism
• Positive tilt lock
• Removable handle arm
• Grooved slots, ( 4 ), on turntable for parts fastening ability with ½” bolts
• Motor shield to protect from spatters
• Low maintenance, grease fittings provided
• Main shaft supported with heavy duty bearing
• Direct ground connection to shaft, ( will not contact through bearings )
• Certified structural design
• All surfaces painted for protection
• CSA – UL Approved Electrical Components
• Warranty is 1 year on parts, 3 years on structural

Features:
Capacity (lbs) Horizontal & Vertical Pos.
1,000 lbs
Capacity (lbs) @ Horizontal Pos. @ 6"
1,000 lbs
DC Motor
1/4 HP 90V
AC Input Voltage
115 / 230 VAC
Torque @ the turntable
6,060 inch pounds
RPM
0 to 2.6
Ground Capacity
500 amps
Turntable size
24" diameter x 5/8" thick steel plate


Model WPS-1500-A Welding Positioner

• Heavy duty construction
• Variable DC speed controller
• Forward – Stop – Reverse Switch
• Foot pedal switch
• Direct mounted drive shaft
• Remote control pedestal with rubber insulted base plate
• 12 foot extension cords for input and remote pedestal
• Tilt 120 degrees left and right in 15 degree increments
• Manual tilt mechanism
• Positive tilt lock
• Removable handle arm
• Grooved slots, ( 4 ), on turntable for parts fastening ability with ½” bolts
• Motor shield to protect from spatters
• Low maintenance, grease fittings provided
• Main shaft supported with heavy duty bearing
• Direct ground connection to shaft, ( will not contact through bearings )
• Certified structural design
• All surfaces painted for protection
• CSA – UL Approved Electrical Components
• Warranty is 1 year on parts, 3 years on structural

Features:
Capacity (lbs) Horizontal & Vertical Pos.
1,500 lbs
Capacity (lbs) @ Horizontal Pos. @ 6"
1,500 lbs
DC Motor
1/2 HP 90V
AC Input Voltage
115 / 230 VAC
Torque @ the turntable
10,866 inch pounds
RPM
0 to 2.9
Ground Capacity
500 amps
Turntable size
30" diameter x 5/8" thick steel plate

 

Model TRS-16-D Turning Rolls

• Heavy duty construction
• Direct positive drive system, ( no friction drive )
• Manual 3 position wheel adjustment with quick release cotter key
• Variable speed controller
• Forward – Stop – Reverse switch
• Foot control switch
• Extension Cord for Foot Switch and Input plug is 12’
• Built in handles for ease of carrying
• Predrilled holes for bench or floor mounting as required
• Low maintenance, one grease nipple on the drive wheel
• All surfaces painted for protection
• CSA – UL approved electrical components
• Warranty is 1 year on electrical components and 3 years parts and structural

Features:
Power Roll Capacity
900 lbs
Idler Roll Capacity
900 lbs
Turning Capacity
1,800 lbs
Wheel Adjustment Positions
3
Diameter Capacity
3/4" - 16"
Urethane wheels in diameter
2" x 6"
Wheel per shaft
2
Speed Range
0 to 113 in/min
DC Motor
1/8 HP 90V
AC Input Voltage
115 / 230 VAC
Torque @ the wheels
1,300 inch pounds
RPM @ the wheels
0 to 6
Wheel Shaft Diameter
5/8"



Model TRS-60-B Turning Rolls

• Heavy duty construction
• Direct positive drive system, ( no friction drive )
• Manual 5 position wheel adjustment in 2” increments
• Variable speed controller
• Forward – Stop – Reverse switch
• Foot control switch
• Heavy insulated extension Cord for Foot Switch and Input plug is 12’
• Remote control pedestal with rubber insulated heavy base plate
• Quick disconnect on control pedestal for portability and servicing
• Built in handles for ease of carrying
• Built in hooks for hoisting
• Predrilled holes for bench or floor mounting as required
• Low maintenance, one grease nipple on the drive wheel
• All surfaces painted for protection
• CSA – UL approved electrical components
• Warranty is 1 year on electrical components and 3 years parts and structural

Features:
Power Roll Capacity
1,580 lbs
Idler Roll Capacity
1,580 lbs
Turning Capacity
3,160 lbs
Wheel Adjustment Positions
5
Diameter Capacity
3" - 60 "
Urethane wheels in diameter
2-1/2" " x 10 "
Wheel per shaft
2
Speed Range
0 to 63.05 in/min
DC Motor
1/8 HP 90V
AC Input Voltage
115 / 230 VAC
Torque @ the wheels
3,805 inch pounds
RPM @ the wheels
0 to 2.07
Wheel Shaft Diameter
1"


Model TRS-96-A Turning Rolls

• Heavy duty construction
• Direct positive drive system, ( no friction drive )
• Manual 8 position wheel adjustment in 2” increments
• Variable speed controller
• Forward – Stop – Reverse switch
• Foot control switch
• Heavy insulated extension Cord for Foot Switch and Input plug is 12’
• Remote control pedestal with rubber insulated heavy base plate
• Quick disconnect on control pedestal for portability and servicing
• Built in handles for ease of carrying
• Built in hooks for hoisting
• Predrilled holes for bench or floor mounting as required
• Low maintenance, one grease nipple on the drive wheel
• All surfaces painted for protection
• CSA – UL approved electrical components
• Warranty is 1 year on electrical components and 3 years parts and structural

Features:
Power Roll Capacity
1,580 lbs
Idler Roll Capacity
1,580 lbs
Turning Capacity
3,160 lbs
Wheel Adjustment Positions
8
Diameter Capacity
3" - 96 "
Urethane wheels in diameter
2-1/2" " x 10 "
Wheel per shaft
2
Speed Range
0 to 63.05 in/min
DC Motor
1/8 HP 90V
AC Input Voltage
115 / 230 VAC
Torque @ the wheels
3,805 inch pounds
RPM @ the wheels
0 to 2.07
Wheel Shaft Diameter
1"

Model TRS-156-A Turning Rolls

• Heavy duty construction
• Dual direct drive system
• Wheels per shaft – 2, ( total of 8 wheels )
• Forward – Stop – Reverse switch
• Foot control switch
• Remote control pendant with on / off and forward / reverse switch
• Built in hooks for hoisting
• Bottom clearance for lift trucks
• All surfaces painted for protection
• CSA – UL approved electrical components
• Warranty is 1 year on electrical components and 3 years parts and structural

Features:
Power Roll Capacity
5,000 lbs
Idler Roll Capacity
5,000 lbs
Turning Capacity
10,000 lbs
Wheel Adjustment Positions
8
Diameter Capacity
12" - 156"
Urethane wheels in diameter
3" x 12"
Wheel per shaft
2
Speed Range
0 to 55 in/min
DC Motor
1 HP
AC Input Voltage
115 / 230 VAC
Torque @ the wheels
43,200 inch pounds
RPM @ the wheels
0 - 1.45
Wheel Shaft Diameter
1-1/4"
 

 

Model WTT-1000-A Welding Turntable

• Heavy duty construction

• Variable DC speed controller
• Forward – Stop – Reverse Switch
• Foot pedal switch
• Direct mounted drive shaft
• Remote control pedestal with rubber insulted base plate
• 12 foot extension cords for input and remote pedestal
• 1,000 pound capacity
• 115 / 230 VAC input
• DC Gear Motor
• 20 inch diameter turntable x 5/8 inch thick
• Grooved slots, ( 4 ), on turntable for parts fastening ability with ½” bolts
• 0 to 2.6 RPM, 6,060 inch pounds of torque @ turntable
• 500 amps grounding capacity
• Main shaft supported with heavy duty thrust bearing
• Direct ground connection to shaft, ( will not contact through bearings )
• Certified structural design
• All surfaces painted for protection
• CSA – UL Approved Electrical Components
• Warranty is 1 year on parts, 3 years on structural

 

 
 
© 2006 MAG Tool Inc. All Rights Reserved.  |  Privacy Policy | Terms of Use | Site Map |