Cuts Cleanly Through Copper and CPVC Tubing With Only a Few Turns - Cut Tubing with Just a Twist of the Wrist
Each PIPESLICE is designed to cut one pipe size. Three sizes are available.
#7027 3/8" Nominal Size
#7028 1/2" Nominal Size
#7029 3/4" Nominal Size
• Clip on and rotate. It's that easy!
• Self adjusting and locking to speed cuts.
• Designed to eliminate external burrs.
• Particularly advantageous in confined areas, where clearance is at a minimum.
• Can be used with just one hand.

1. Select correct size for tubing to be cut.
2. Mark tubing where cut is desired.
3. Align cutter blade with mark on tubing and then clip tubecutter all the way onto the tube.
4. Rotate PIPESLICE with one hand while securing tube with the other hand.
5. Continue to rotate until tube is cut through-usually 3 or 4 turns.

Replacement Blades are Available. Order as follows... to fit models #7027 and #7028, ( 1/2" and 3/8" ), refer to P/N 7031 to fit model #7029, ( 3/4" ), refer to P/N 7032