MAG Tool Inc.

Type CC80

MACHINE CAPACITY:
This machine offers you a large diameter cutting range thanks to its system made up of 3 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC80 cuts up to 7 mm in thickness on mild steel and up to 5 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor: 13 Kg
• with motor: 15 Kg

SPECIAL CHARACTERISTICS:
• Clamping system with wheel
• Machine is delivered in a protective plastic case for easy transportation

MOTORISED SAW BLADE:
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 705W: 130 to 320 RPM.
• Slow electric 1,000W: 10 to 250 RPM, ( for thick and tough tubes ).
• Pneumatic 1,200W: 0 to 130 RPM.

SPECIFIC ACCESSORIES:
• Clamp for installation on work table.
• For all other accessories, please refer to the accessories section

CUTTING TIME:
The cut is rapidly done with the AXXAIR machines:
1" OD with 2 mm thickness @ 15 seconds
2" OD with 2 mm thickness @ 25 seconds

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

Type CC120

MACHINE CAPACITY:
This machine offers you a large diameter cutting range thanks to its system made up of 4 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC120 cuts up to 15 mm in thickness on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor: 53 Kg
• with motor: 56 Kg

MOTORISED SAW BLADE:
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1,000W: 10 to 250 RPM.
• Flex electric 1,200W: 90 to 270 RPM, ( for thick and tough tubes ).
• Pneumatic 1,200W: 0 to 130 RPM.

ACCESSORIES:
• Penetration lever
• Automatic rotation
• Automatic clamping
• For all other accessories, please refer to the accessories section

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CUTTING TIME:
The cut is rapidly done with the AXXAIR machines:
4" OD with 5 mm thickness @ 50 seconds
2" OD with 3 mm thickness @ 8 seconds

Type CC170

CC220

MACHINE CAPACITY:
This machine offers you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube. The CC220 cuts up to 15 mm on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor: 83 Kg
• with motor: 86 Kg

MOTORISED SAW BLADE:
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1,000W: 10 to 250 RPM.
• Flex electric 1,200W: 90 to 270 RPM, ( for thick and tough tubes ).
• Pneumatic 1,200W: 0 to 130 RPM.

SPECIAL ACCESSORIES:
• Automatic rotation
• Automatic clamping
• Penetration lever which facilitates the cutting of thick tubes
• Wheel for easier rotation of the motorised saw blade

CUTTING TIME:
The cut is rapidly done with the AXXAIR machines:
• 8" with 5 mm thickness @ 1 minute 15 seconds
• 2" with 3 mm thickness SS @ 20 seconds

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC320

MACHINE CAPACITY:
This machine offers you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Clamping jaws Capacity:
Basic SS clamping jaws: 215 to 330 mm
Extra clamping jaws: 140 to 250 mm

The CC320 cuts up to 15 mm on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop.
• without motor: 93 Kg
• with motor: 96 Kg

MOTORISED SAW BLADE:
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1,200W : 90 to 270 RPM.
• Slow electric 1,200W : 30 to 90 RPM, ( for thick and tough tubes ).
• Pneumatic 1,200W : 0 to 130 RPM.

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

SPECIAL ACCESSORIES:
• Penetration lever which facilitates the cutting of thick tubes
• Wheel for easier rotation of the motorised saw blade

SPECIAL ACCESSORIES:
• Automatic rotation
• Automatic clamping
• For all other accessories, please refer to the accessories section

CC420

MACHINE CAPACITY:
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Diameter: Ø215 to 420 mm
Thickness: up to 15 mm on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop; 158 kg

MOTORISED SAW BLADE:
The motor is easily dismounted and interchanged. The machine can be delivered in the pneumatic or electric version according to your choice. AXXAIR offers a varied speed range for these motors in order to cut all your tubes.
• Standard electric 1,200W : 90 to 270 RPM.
• Slow electric 1,200W : 30 to 90 RPM, ( for thick and tough tubes ).
• Pneumatic 1,200W: 0 to 130 RPM.

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC520 and CC620

CC520

MACHINE CAPACITY:
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Diameter: Ø215 to 420 mm
Thickness: up to 15 mm on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop; 250 Kg

MOTOR:
• Quick Flex motor 1,200W
• Slow Flex motor 1,200W
• Pneumatic AXXAIR motor 1,200W

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

CC620

MACHINE CAPACITY
These machines offer you a large diameter cutting range thanks to its system made up of 6 concentric clamping jaws. This system enables you to perfectly maintain your tubes while cutting in order to prevent deformation of the tube.

Diameter: Ø 400 to 620 mm
Thickness: up to 15 mm on mild steel and up to 10 mm on stainless steel.

MACHINE WEIGHT:
AXXAIR machines are lightweight and portable, therefore ideal for use on-site or in the workshop; 280 Kg

MOTOR:
• Quick Flex motor 1,200W
• Slow Flex motor 1,200W
• pneumatic AXXAIR motor 1,200W

ADVANTAGES:
• Large cutting capacity
• The cut is effected close to the clamping section for a better hold of the tube, especially on thin tubes
• Perfectly square burr-free cuts
• Ideal for all your welding preps

ORBITAL PIPE CUTTER

For 4-12" (100-300mm) steel and ductile iron pipe. The clamshell frame and modular design make this machine fast and easy to set up and operate. A single frame and gear plate make the orbital the most economical unit for its size range. Standard 115V or 230V electric power. Complete with all necessary accessories and packed in a storage case.

6412: Cut and Bevel, DI and CI pipe 4-12" ( 100-300mm )
8412: Cut and Bevel, Steel pipe 4-12" ( 100-300mm )
5412: Cut and Groove, Steel pipe 4-12" ( 100-300mm )

Gross weight..........................................................271 Lbs. ( 123 kg )
Net weight .............................................................271 Lbs. ( 123 kg )

Specify 115V or 230V

Spares and Accessories:

220267 Cut off blade, DI

220808 RH Cut off blade, steel

220809 LH Cut off blade, steel

220705 30† Steel bevel blade

220706 37 1/2† Steel bevel blade

220770 45† Steel bevel blade

220707 45† DI bevel blade

220855 Support stand