This variant on the H3PR allows you to bend upto 3" NB tube.
Notice the larger reinforced Wing-Head.

The H3PR ½" - 3" package:
• A full set of 90º Formers for ½", ¾", 1", 1-¼", 1-½", 2", 2-½", 3" NB.
• An Extension Ram.
• All packed in a ply wood case for ease of transport.
Special Former sizes at the customers request.

This machine provides great versatility and accuracy with the Rotary easily attached to the H3PR unit.

The main advantage of the Rotary attachment is that it enables the use of a Knife Edge Guide. This type of guide slides inside the specially machined Former and encases the whole of the tube and so supports it's shape during the bend.

This is why the Rotary can bend light or medium gauge tube as the guide supports the tube during the bend and protects the tube from surface damage.

The balanced scissor linkage converts linear ram travel into a smooth rotary bending action and due to its design. This allows you to bend tubes that are unsuitable for press-bending.

The clever design of a Pin and Strap which holds the tube to the former allows bends to be formed in close proximity and in various planes.

The H3PR Rotary is designed to bend light or medium gauge Steel, Stainless Steel, Aluminium or Copper tubes. Maximum angle of bend 120º. Former sets available

The H4PR 1/2" to 4" NB tube / pipe bender offers a convenient hand hydraulic bender which covers a massive range of tube and pipe sizes.
This machine will bend 1/2" to 3" NB in "one shot" plus segment bending for between 3" to 4" NB.

The H4PR package:
• A full set of 90º Formers for ½", ¾", 1", 1-¼", 1-½", 2", 2-½", 3"NB,
• A 4" NB Clump former.
• An Extension Ram.
• All packed in a ply wood case for ease of transport.
Special Former sizes at the customers request.

The H3PR 180º for bending up to 180º, "U" bends.
This hand operated hydraulic pipe / tube bending machine comes complete with special 180º Rocker Arms, an Extension Ram and 180º machine grooved Formers.

The H3PR 180º package:
• A full set of 180º Formers for ½", ¾", 1", 1-¼", 1½", 2" NB.
• An Extension Ram.
• All packed in a Metal lockable container, ideal for on-site security.

Special Former sizes as the customers request.

The H3PR 90º hand operated pipe / tubebending machine comes complete with Formers.
The H3PR 90º package:
• A full set of 90º Formers for ½", ¾", 1", 1-¼", 1-½", 2".
• All packed in a Metal lockable container, ideal for on-site security.

POWER RETURN: efficent double acting solid ram overcomes problems of withdrawing bent pipes.
PLUNGER BEARING: ingenious turret arrangment provides maximum surface and support to the operating pluger. Complete protection from the entry of dirt is ensured by the fitting of an O-Seal into the bearing housing.

The H3PR CONDUIT tubebending machine utilises the same hydraulic pump and wing head as the basic H3PR but includes special large radii formers for electrical conduit tubing.

The H3PR Conduit package:
• Formers for 5/8" to 2" or metric equivalent.
• All packed in a Metal lockable container, ideal for on-site security.
Formers available : 3/4", 1", 1-1/4", 1-½", 2" ERW, or metric / imperial equivalent.
Special Former sizes at the customers request.

The H3RB reverses the recognised method of ram bending.

Complex bends as square coils which are impractical with the normal wing-head design can be easily produced.

For use with Standard formers from 1/2" to 1-¼" NB or Metric equivalent.


Special Former sizes at the customers request.

H3FB - FLAT bar bending

Flat bar bending machine utilises the H3PR's wing-head.


All you need is the additional forming tool and accessories.


Maximum capacity: 100 mm x 12 mm mild steel