HAND DEBURRING TOOLS

EDGE OFF

Includes: S10 Blade mounted in an 8 mm Hexagonal painted Aluminium Handle. The blade is not replaceable. Handy pocket clip.

PLASTIC EDGE OFF

Includes: S10 Blade, Plastic Handle. Holds all "S" ( Ø 3.2 mm ) Blades. The Blade is replaceable. Most competitive tool.

RAPID BURR

Includes: S10 Blade, 12 mm Hexagonal painted Aluminium Handle. Holds all "S"
( Ø 3.2 mm ) Blades. To replace blades, push black sleeve back into handle and pull blade out.

SOFT GRIP

Includes: SG handle, S100 and N10 Cobalt Blades. Ergonomically held handle. Accepts both heavy and light duty "S" and "N" Blades due to 2 holes.

NOGA BURR 1, 3, 5

NOGA BURR 1: Includes: NB-handle and S10 Blade.
NOGA BURR 3: Includes: NB-handle and S10, S20, S35 Blades.
NOGA BURR 5: Includes: NB-handle and S10, S20, S35, S101, S202 Blades.
TEDDYBURR

Includes: N1 Blade, 8 mm Hexagonal painted Aluminium Handle.
Holds all "N" ( Ø 2.6 mm ) Blades. Easy to replace blades. Handy pocket clip.
LIZA BURR

Includes: Uni-handle, SN-holder, N1 and N2 blades. Double sided Blade holder to utilize both light duty "N" - series Blades and heavy duty "S" - series Blades. Telescopes from 20-110 mm with N Blades, 20-94 mm with S Blades.
MINI REVERSIBLE COUNTERSINK

Includes: Steel handle and small blade R1. Very fine tool for deburring both back side and front side of holes. Unique 2 pairs of cutting edges. Cuts in both clockwise and anti clockwise directions. Blade has two working positions. Range: 3 - 5.5 mm.
REVERSIBLE COUNTERSINK

Includes: Steel handle and blade R2. Similar to RC1000 only larger. Range: 5 - 10 mm.
LARGE REVERSIBLE COUNTERSINK

Includes: Aluminium handle and blade R3. Similer to RC2000 only larger. Range: 10 - 22 mm.
FIXED ROTODRIVE

Includes: NB-handle, 10.4 RotoDrive Countersink. RotoDrive - the quickest way to chamfer by hand.
EXTERNAL ROTODRIVE

Includes: NB-handle, External RotoDrive Countersink. Chamfer the O.D. on bars and tubes. Range: 4 - 18 mm.
COUNTERSINK

Includes: Uni-handle, C-holder, 20 mm Countersink. Telescopes from 6 - 80 mm. Can be locked in any position. Most useful for chamfering deep holes.
H.D. ROTODRIVE Accepts C12, C20 and C30 Countersinks.
Includes: Uni-handle and H.D. cranked RotoDrive Bladeholder. 20 mm Countersink.
SCRAPER

Includes: UNI-handle, Double ended triangular scraper T120. Has two sharp triangular ends for double tool life. Hollow ground. Can be locked in required position.
MINI-SCRAPER

Includes: UNI-handle, D-holder, Triangular Mini-Scraper D50. Hollow ground.
INTERNAL SCRAPER

Includes: UNI-handle, D-holder, Internal Scraper D66. For deburring of cross holes.
ADJUSTABLE SCRAPER

Includes: 12 mm Anodized Handle, T80 double ended triangular scraper. Hollow ground. Locking collar to control blade extension.
TRIANGULAR SCRAPER

For scraping, trimming and deburring almost all materials.
5 x 40 mm triangular medium size scraper. Hollow ground. The Blade is not replaceable.
TRIANGULAR MINI SCRAPER

For scraping, trimming and deburring almost all materials.
3.2 x 40 mm triangular mini scraper. Hollow ground. The Blade is not replaceable.
CERA-CUT

Includes: Ceramic Blade mounted in a modified Soft Grip Handle. The Blade is not replaceable. Ideal for deburring of all plastics and other soft materials. Extremely long life.
NOGA "V"CUT

Includes: UNI-handle, LID Blade-holder, L3 Blade.
For sheet metal. Range 1 - 8 mm. Hand-Guard available upon request, Catalogue No. NC9000
NOGA MINI-CUT

Includes: UNI-handle, LID Blade-holder, L4 Blade.
Used for deburring small ridges in difficult to reach places. Range of 0 - 2.5 mm.
SLOT CLEANER

Includes: UNI-handle, LD Blade-holder, L5 Blade. To relieve corners of narrow slots from 3.5 mm. Double ended blade L7 for cutting in two directions also available.
CORNER CLEANER

Includes: UNI-handle, LD Blade-holder, L6 Blade. Effective corner relief. Wide range of applications.
KEYWAY BURR

Includes: UNI-handle, K Blade-holder, N80K Blade. Effectively removes burrs from internal I and external keyways. Range using three blades: 2.4 - 11 mm.
LEADER

Includes: handle, L Blade-holder, L1 Blade.
Chamfering straight or curved edges. Ensures 45° chamfers.
DOUBLE-BURR

removes burrs from both sides of sheet metal.
Includes: Double Burr, Hand Guard, 2 x N80 Blades. Simultaneously
NOGA "O" RING BURR

Includes: NB-Handle, OR Blade. Removes burrs from internal °0" ring grooves. Range 0-3 mm ( groove width )
THREAD CLEANER

Includes: NB-Handle, TC Blade. For cleaning damaged internal threads. Minimum Diameter 9 mm. Maximum thread pitch 3 mm.

NES 1 A

D Range 4-18 mm
R max. 68 mm W 23 x
L 61 x H 62mm

NES 2

D Range 17 - 38 mm
R max. 117 mm W 32 x
L 105 x H 110mm
NES 3

D Range 32-128 mm
R max. 250 mm W 44 x
L 305 x H 130mm
 
© 2006 MAG Tool Inc. All Rights Reserved.  |  Privacy Policy | Terms of Use | Site Map |