MAG Tool Inc. - Flanging Machines

Models M343 and M369

Models M343 and M369 Flanging Machines cold-form pipe ends to a 90° flange. The machines are simple in design and simple to operate. Skilled labor is not needed to operate the machine, nor to bolt the flanges together-entirely eliminating the need for skilled labor in joining pipe sections.

A complete tooling change can be performed in just minutes. Once the pipe is in place, the flange is formed in minutes. The whole operation - install tooling, ( if required ), insert pipe, form the flange, remove the pipe, ( requires a maximum of 5 minutes ). This compares favorably to the approximately 45 minutes required to weld a flange onto the pipe.

Model 343 Technical Specifications:
CAPACITY	Pipe Schedules 5, 10 and 40 from 1/2" to 4" IPS; Schedule 80 from 1/2" to 2" IPS.
POWER DRIVE and CONTROL	5 HP, geared head motor with brake. Pneumatic operation, 3 CFM required.
OPERATION	Pipe is clamped in machine jaws and remains stationary while rotary spinner head forms flange.
DIMENSIONS	Length 60" - Width 30" - Height 58"
SHIPPING WEIGHT	2,200 Lbs.

Model 369 Technical Specifications:
CAPACITY	Pipc Schedules 5, 10, and 40 from 1-1/2" to 8" IPS; Schedule 80 from 1-1/2" to 4" IPS
POWER DRIVE & CONTROL	15 HP, self-contained hydraulic system
OPERATION	Pipe is clamped in machine jaws and remains stationary while rotary spinner head forms flange.
DIMENSIONS	Length 102" - Width 44-1/2" - Height 67"
SHIPPING WEIGHT	4,500 Lbs.