The 8M and 12M are Beam type pipeline benders, and supplied with Electric, Diesel or petrol motors for shop or field operation.
Constructed from bolted and welded mild steel plate to give a frame of immense strength, and mounted on either castors for easy shop movement or skids for field work.

NOTE:
As with all segment bending large radius or "sweep" bends only are possible.

• Heavy duty tube / pipe bending made easy with this motorised, Electric hydraulic bender producing 5,000 PSI / 350 bar of bending force.
• Standard formers supplied for 90º bending, 1/2" to 2" NB ( 15 to 50 mm ).
• Optional 180º bending attachment for 1" to 2" NB sizes.
• Motor voltages available: 110V, 220V, 50 Hz, 1 Ph or 415V, 50 Hz, 3 Ph.

• The H3M is a Single Ram heavy duty electric hydraulic tube / pipe bender. Capable of producing 5,000 PSI / 350 bar of bending force.
• 4M and 4H is Twin Ram heavy duty electric hydraulic tube / pipe bender.
• 5M and 5H is Three Ram extra heavy duty electric hydraulic tube / pipe bender.
• Standard formers supplied for 90º bending.
• 5" and 6" NB formers are Clump type.
• Castor mounted for ease of movement, ( optional ).
• Motor voltages available: 110V, 220V, 50 Hz, 1 Ph or 415V, 50 Hz, 3 Ph.

NOTE:
The 4H AND 5H are "HAND" hydraulic machines that have the same bending capacity as their "M" series counterparts.

• A Motorised Power Pack for portable and remote control tubebending is ideal for work that involves alot of travelling around or to and from a site.
• It has the same bending capacity as the H2M, 1/2" to 2" NB, but half the weight so you may easily load it in the back of a van and drive off.
• For use with 10" or 20" stroke ram Tubela ram units.
• 110V only.