MOTORIZED bending machine with self-braking 2 speed motor ( .75 kW ).

MAIN FEATURES:
• Pyramid bending machine with hydraulic top roll adjustment.
• Three driving rolls.
• Digital read-out.
• Articulated dual control straighteners.
• Single-volume base, ( to tilt the machine for work on the horizontal axes which is recommended for the rolling of coils or any profile with a large radii ).

STANDARD EQUIPEMENT:
• Universal rolls.
• Low-voltage foot pedal unit with security stop button.
• Service keys.
• Instruction manuals.

CAPACITY:
• Angle iron - easy way 2.375 x 2.375 x 1/4 inch
• Round tube: 3.000 x 0.120 inch wall
• Square tube: 2.000 x 2.000 x 0.125 inch
• Single-volume base*.
• Top roll adjustment with hydraulic cylinder.
• Digital read-out.
• Mechanical limit switch.
• Articulated double-control.
• Foot pedal unit with security stop button.

MAIN FEATURES:
• BENDING MACHINE, PYRAMIDAL TYPE
• TOP ROLL ADJUSTMENT

These series has three driving rolls and is suitable for the bending of profiles in general and of all those profiles and tubular sections, which require a surface finish with no defects.

In fact the roll smooth surface doesn't damage the material and the constant feed is guaranteed by the three driving action.

* the single-volume base allow to tilt the machine for work with horizontal axes. This position is recommended for the bending of coils and of any profile with big radii.

STANDARD EQUIPMENT
• Universal roll.
• Low-voltage foot pedal unit with security stop button.
• Service keys.
• Instruction manuals.

ON REQUEST
• Rolls for tube and special profiles.
• Longer driving shafts.
• Shaft tensioning brace rods.
• Calibration tool for angles leg-in.