|
|
|
 MODEL
#15: For precision and general purpose applications
MODEL #18: For heavy-duty drilling applications
Feature after feature, BMT Drilling Machines, ( DM ), provide the
ultimate in dependability, year after year. From tool-room versatility
to production speed, performance - proven BMT DM drill with flawless
precision.
In addition, every BMT DM provides a feature that is highly extraordinary:
each is factory-assembled and factory-tested. It is then shipped
assembled, ready for immediate use upon arrival. Uncrating is all
that's required. None of the time-consulting, often difficult, on-the-spot
assembly demanded by competitive units is needed. BMT DM arrive
ready to be put to work.
These outstanding features distinguish MBT DM as the most dependable
workhorses of industry:
• Five-step V-belt pulley drive
• Complete belt enclosure
• Adjustable motor bracket
• Cast-iron machine frame
• Full ball bearing construction
• One piece, 6-spline alloy steel spindle
• Three-spoke feed handle
• Clutch-type quill return spring
• Calibrated positive depth stop
• Safety collar on head
• Start-stop pushbutton mounted up front for convenience
• Large slotted table on standard bench and floor models can
be tilted or swiveled
• Sturdy cast-iron base
MODEL #22: For maintenance service production and
job shop applications.
The BMT Model #22 DM is a rugged machine tool of "time-proven"
design, continuously in demand by maintenance and service shops.
It is classified as a 3 HP, #4 MT, heavy duty, sliding head type,
round column drilling machine of 1-1/2" capacity and 22"
swing. Two models are available, the Round Column Floor Drill and
Pedestal Model.
Outstanding Features are as follows:
• Four-step "B" section V-belt Pulley drive
• Eight speeds: 65 RPM to 1350 RPM
• Quick-shift back gearlever
• #4 Morse Taper, full ball bearing spindle with six driving
splines
• Single-piece sliding head with 10" of travel
• Power feed providing feeds of .004, .008, .012 and .016"
per revolution
• 5-1/2" diameter RIGID column
MODEL #3B : The ultimate variable speed production drill
with a 2-1/2 " capacity.
For shops that demand the finest, the BMT Model #3B RPMster Drilling
Machines provide increased capacity, greater speed range, ease of
operation and new modern styling. Available in either Pedestal Model
or Round Column Floor Model, both have massive construction and
readily accessible controls.
Outstanding features are as follows:
• Variable speed - instant speed change
• Electric tachometer for accurate spindle speeds
• Automatic power feed providing feeds of .006, .010, .014
and .018 " per revolution
• #5 Morse Taper, full ball bearing spindle with six driving
splines
• Single-piece sliding head with 8" of travel
|
 MBE
30 Magtron, ( Mini ):
• 1010 watts, single speed; 760 RPM
• Capacity 7/16" to 1-1/4" annular, Weight @ 13 kg
MBE 40 Magtron:
• 1100 watts, 2 speed; 430 and 770 RPM
• Capacity 7/16" to 1-3/4" annular, Weight @ 15 kg
MBE 100 Magtron:
• 1800 watts, variable speed; 50 to 130 and 160 to 450 RPM
• Capacity 7/16" to 4" annular, Weight @ 26 kg
Options:
• # 22K027, adapter from MT # 2 to Jacobs # 6
• # 22A067, chuck from Jacobs # 6 to ½" twist drill
• # MP1000, pilot for 1" depth of cut
• # MP2000, pilot for 2" depth of cut
• # MP3000, pilot for 3" depth of cut
|
 Designed
for fast, efficient operation, using Slugger® cutters, hole saws
and drills
Solid alloy aluminum construction. It is the most ruggedly constructed
machine in the industry.
Slide and gibbs are heat treated aluminum that is Teflon coated
to insure long life. Slide assembly is positioned together by gauge
block machining. This assembly is located by dowelled gibbs that are
precisely aligned with the V-block. There are no elongated
holes which could allow misalignment. Spindle bore is a #3
Morse Taper. Electrical Panel meets the highest standard of operating
safety. A Circuit Breaker assures no safety hazard to the operator
or machine. Arbor support design for use with "Slugger"
cutters, or drill chuck for use with hole saws or drills.
Chain clamp is standard on all units and clamps to
pipe diameters 1-1/4" through 12"." Optional speed
toggle clamp, clamps 1-1/4" through 6" pipe. Cuts up to
4-1/2" diameter holes in up to 12" diameter pipe.
*Both clamps ensure positive holding during hole cutting operations
and can by used in any position.
Oil feed: The arbor is designed with an oil reservoir for automatic
gravity feed during the cutting operation in the vertical position.
Easy part replacement: Building block design allows easy part repair
or replacement, ( no need to ship machine out for repair ).
Heavy Duty @ 42 Lbs. using an Industrial Drill Motor with 4-speed
internal gear box that operates @ 110, 175, 245 or 385 RPM and 110V,
10A draw, ( 220V is available ). |
• 14" Long Casting
• It Will Fit In Places
Where No Other Tool Will Fit
• Can Cut Up to 4-1/2"
Holes
• Righthander's and Lefthander's Can Both Use the
Mini Easily
• Optional Hole Locator, ( E ).
•
Angle Indicator Mounted in a Protected Area
HOW IT
WORKS:
Attach The MINI HOLE THING to pipe with wrench chain. With alignment
bars properly aligned to pipe, tighten wrench chain with adjustment
nut, first by hand, then securely tighten, using drill traverse rod.
With The MINI HOLE THING properly mounted, insert drill travel plate,
( with electric drill and cutting tool affixed ), into guide slots
until rack-and-pinion gear has been engaged. Activate drill electrically
using drill traverse rod, move drill and cutting tool forward until
cutting tool touches work piece. Back off drill and cutting tool to
observe cutting pattern. If cutting pattern is correct, ( cutting
equally on both sides of center ), advance drill and cutting tool
until tool has passed through work piece. If cutting pattern is incorrect,
realign the The MINI HOLE THING to the pipe or the electric drill
to the travel plate. Back off drill and cutting tool , turn drill
off electrically and remove The MINI HOLE THING from the pipe.
FEATURES:
• SECURE GROUNDING
of the electric drill to the pipe eliminates the possibility of an
electric shock in wet or damp areas.
• INSULATED
HANDLE for advance drill tool affords additional protection
against electric shock.
• NO DRILL TWIST
to injure fingers or wrist as often occurs when drilling large diameter
holes with a hand-held drill.
• ELIMINATES HAZARD
to a drill operator working in a difficult or dangerous position while
trying to exert high pressure on the cutting tool such as when in
a trench, on a scaffold or on a ladder.
• GREATLY
REDUCED DRILLING TIME is achieved through the use of a rack-and-pinion
drive to advance the cutting tool, which allows the operator to effortlessly
exert high pressure on the cutting tool.
• LONGER
LIFE for cup hole saw or cutting tool, due to precision alignment
of fixture to work piece.
• COST AND TIME SAVINGS
due to the elimination of a pilot drill with the cup hole saw.
• SMALL PIPE ADAPTER allows standard unit to
be mounted on pipe with diameter as small as 1-1/4".
•
MOUNTS EASILY AND QUICKLY to various size pipes,
up to 10" diameter. Larger size pipe requires additional chain
that can be purchased separately.
• ANGLE INDICATOR
ready for easy mounting. |
Mini-Hole
Thing |
 |
Parts & Accessories
A. New Mini Hole Thing Tool - #1001 - Includes A, D, &
F
B. Milwaukee 1660-1 Drill - #1103 - Includes A, B, D, &
F
C. Steel Tool Box - #1105 - Includes A, B, C, D, E, &
F
D. Small Pipe Adapter
E. Hole Locator
F. Angle Indicator |
|  RANGE:
3 to 60 mm ( 0.03 to 2.4 inches )
Fast, easy handling.
Approved patented reversing prism system that guarantees the highest
possible accuracy and cutting edge symmetrie.
Works on all kinds of Drill bit's, ( including Special bits), Stepdrill
bits, Centre bits for sheet metal and for wood, Cutters, Milling
cutters, Roughers a.s.o. High-Speed Steel, ( HSS ), Chrome Vanadium,
( CV ), Tungsten Carbite.
BSG 60 basic unit from 3 to 40 mm, ( 0.03 to 1.6 inches ), including
corundum grinding wheel.
|
|
