MAG Tool Inc. - DF Machine

DF MACHINE

The Model DF is a double-lap flaring machine which produces a double-thickness flare. It will also produce a single-thickness flare and an upset bead.

The machine forms double-lap flares to precise 37º and 45º dimensions within MS and SEA specifications.

Single flares and beads are also done with precision and within specifications every time.

The Model DF is a high-production unit, allowing the production of up to 600 double flares per hour.

The machine is operated by a single lever which activates the two steps required to form a double flare.

No electricity is required. All operations are pneumatically powered.

Technical Specifications:
Capacity	Double Lap Flaring: 1/8" to 1/2" OD annealed ferrous or non ferrous tubing Single flaring: 1/8" to 3/4" O.D. annealed ferrous or non ferrous tubing Beading: 3/16" to 1/2" OD annealed ferrous or non ferrous tubing
Operation	75/100 PSI, air supply required. Air consumption approximately 1 1/2 CFM at 100 PSIG. No electrical connection.
Air Supply	75/100 PSI, air supply required. Air consumption approximately 1 1/2 CFM at 100 PSIG. No electrical connection.
Standard Tooling	For MS and SAE flare specifications
Dimensions	Length 28" Width 18" Height 42"
Shipping Weight	480 Pounds

Possible Endforms