KEY FEATURES:
• Industrial PC 266MHZ processor, 105-key keyboard, 10GB HD, CD ROM drive, integrated mouse, modem / fax, ( optional )
• Industrial 15" SuperVGA display
• Microsoft Windows '98 and WINTAU software program.
• 16 traverse speeds for x, y, w and z, which can be set at each program step.
• Infinitive program storage capacity. Each program contains up to 250 steps, ( = 250 bends on the same bar )
• Profile tables up to 20 coordinates each
• Three dimensional display of the programmed shape

This numerical control includes all the features of the above-mentioned ones, but it can create any even complex bends with infinitive bending radii in very short times and with little waste of material.

It is supplied with an industrial computer with advanced processor, Windows '98 operating system and Wintau software program, this control allows managing bending programs and other files. Graphics and macro-instructions system make the programming easier to perform simple bends sequences and some preset geometric shapes. A graphic windows shows the program being created step by step and once all data are entered, you can simulate the piece performance in three dimensional way. High-tech interlockings assure a very high positioning accuracy. A complex diagnosis system allows the user to check out the machine efficiency at any moment. Continuous updating on WINTAU software is available at an additional cost.

KEY FEATURES:
• Alphanumerical keyboard with multifunction keys
• Rear-lighted LCD display with 16 characters on two rows
• 2 traverse speeds for x and y axes

Storage capacity:
- up to 20 programs of 30 steps each, ( =30 bends on the same bar )
- up to 90 profiles of 10 co-ordinates each

This control has been designed to make suitable for door and window industry, with a good joint control among the bends.

The door and window frame bending, such as round or depressed arches, to manufacture styling doors and windows is also made easier by the bending radius direct entry.

You do not need to perform wasteful bending tests anymore to find the right position of the bending roll: you just have to enter the required radius into the program.

CNC-C can satisfy many requirements in several applications fields, such as furniture, greenhouse frames and toys.

The price is another good quality of this control: lower than others, ideal for those who want a first approach to the high-tech without having to undergo heavy investments.

KEY FEATURES:
• 51-key alphanumerical keyboard with some multifunction keys
• Rear-lighted LCD display with 16 characters on 2 rows
• 8 traverse speeds for x, y and w, ( Alfa ), axes
• Storage capacity up to 40 programs of 10 steps each, ( =100 bends on the same bar )
• PC program to load and save bending programs from the numerical control to PC and vice versa by means of RS232 serial port

This last Tauring computerized numerical control contains in a few room all the features of one of the most sophisticated controls. An alpha numerical membrane keyboard and a wide LCD display allow creating bending programs easy.

This control can be easily interfaced with any PC or laptop by means of a serial cable and a software program supplied with the machine.

This allows bending program loading and saving on your PC hard disk and creating wide archive with no space limit.

A real WINTAU-C software program, ( to be installed on you PC ), is also available: you can create, modify and delete programs from you PC directly. Once the program is created, a simple command sends it to the CNCS control by starting the automatic cycle directly.